CAN-AM CHAINS
The Best Value in Chain Products Available on The Market Today!!!
Can-Am Chains is a premier manufacturer of a wide variety of welded steel, specialty chains and attachments, sleeve bearings and sprockets, for the forest products industry. From Pulp and Paper to Saw Mills to Oriented Strand Board and Engineered Wood Products, Can-Am Chains has a reputation for performance and reliability. Can-Am chains are designed and constructed to perform in such rugged chain conveyor applications as log-decks, transfer decks, un-scramblers and drive applications of all types. Whenever chain performance means productivity Can-Am Chains Deliver!
Today, Can-Am Chains has over 200,000 square feet of state-of-the-art manufacturing capacity. One manufacturing plant is located in Clackamas, Oregon. The other two manufacturing facilities are located in Surrey, British Columbia.
CAN-AM SHARP TOP ROLLER CHAINS
CAN-AM SHARP TOP ROLLER CHAIN for applications that demand quality, durability and performance. All CAN-AM Sharp Top Roller Chains exceed ANSI and British Standards and are exact replacements for new and existing Sharp Top Roller Chain applications.
FEATURES
- Fine blanked side plates
- Heat treated shot peened bushing and plates
- Triple alloy steel rivet pins with deep case depth
- Ball sized bushed plates for uniform hole size
- Press fits for pins and bushings
- Factory lubricated for extended life
WELDED CHAINS
Range of Welded Chains:
- MILL CHAIN
- DRAG CHAIN
- MALLEABLE CHAIN
- POWER TRANSMISSION CHAIN
- WASTE WATER TREATMENT CHAIN
- MANGANESE DEBARKER
Can-Am Welded Steel Chains
Can-Am Welded Steel Chains provide an economical and superior replacement for most cast chain applications. They will normally operate over the same sprockets and in the same channel as their cast chain equivalents. Besides being more economical, Welded Steel Chain has the advantages of:
- Greater Wear - simply turn chain over when worn on one side.
- Higher Ultimate Strength - Won't break as easily as malleable chains.
- Weldability - Need attachments? Simply weld them on to side-bars.
For higher impact strength and greater wear resistance, use fully heat treated or induction hardened chain.
Heat treated and induction hardened
Can-Am welded steel chains are available from stock with fully heat treated parts and/or induction hardened parts. For maximum chain life in severe applications including heavy impact loading, high speed requirements, capacity loads, or abrasive conditions, some or all of your Can-Am chain will benefit from specific heat treatment.
Heat treating of Can-Am steel chain will increase the wearability and prolong the life of your chain, thus reducing down time and minimizing maintenance problems. More Technical Information on heat treatment and induction hardening can be found in Maintenance & Technical Information.
Through heat treating and induction hardening
Used individually or combined, the two types of heat treating
Can-Am Chain can dramatically increase chain life.
IMPACT - Through heat treated chain (to the proper hardness)
will improve impact strength two or three times.
STRENGTH - Heat treated sidebars will increased strength
by 20-30%.
WEAR - In a non-abrasive environment heat treated chain will give up to 50% greater wear life. Reduction of elongation of side bar holes can be achieved by induction hardening the hole perimeter. In a non-abrasive environment, induction hardened chain will give several times greater wear life.
Range of Roller Chains:
- BRITISH STANDARD
- STANDARD SERIES CHAIN
- STAINLESS STEEL CHAIN
- SHARP TOP CHAIN
- AMERICAN STANDARD
- STANDARD SERIES CHAIN
- HEAVY SERIES CHAIN
- STAINLESS STEEL CHAIN
- LEAF CHAIN
- SHARP TOP CHAIN
Can-Am Roller Steel Chains
Our chains are made in order to following standards:
- DIN 8187 British Standard chains
- DIN 8188 American Standard roller chains
Can-am roller chains are made to our own very high standards, using steles especially selected for fatigue strength and exceptional long life
provides the power to perform because it has been engineered to exceed the industry’s highest standards. delivers leading edge solutions with over 100 years of advanced engineering knowledge and experience.
Some of the features and benefits of Precision Roller Chain include the following:
- Waisted Link Plates - The design of sizes 3/4" and larger reduces the bending stress in the link plate which increases the fatigue strength of the chain.
- Solid Rollers - utilizes solid rollers on all precision roller chains. The solid rollers allow for smooth rotation on the bushing, minimizing the impact load as the chain engages the sprocket tooth.
- Factory Preloading - precision roller chain is preloaded during assembly. Preloading the chain seats the chain components, which minimizes the initial elongation of the chain.
- Heat Treatment - Rigorous process controls and state of the art heat treating furnaces assure consistent quality in all chain components; this results in optimum toughness and resistance to wear.
- Pre-lubrication - After final assembly the roller chains are hot dipped in a special lubricant. This process assures that all the load bearing surfaces are protected from metal to metal contact, improving the wear life of the chain.
- Shot-Peened Parts - All precision chain rollers and link plates are shot-peened for greater fatigue strength.
